#!/bin/bash

# Enable strict bash mode to stop the script if an uninitialized variable is used, if a command fails, or if a command with a pipe fails
# Not working in some setups : https://github.com/tigerblue77/Dell_iDRAC_fan_controller/issues/48
# set -euo pipefail

source functions.sh

# Trap the signals for container exit and run gracefull_exit function
trap 'gracefull_exit' SIGQUIT SIGKILL SIGTERM

# Prepare, format and define initial variables

# readonly DELL_FRESH_AIR_COMPLIANCE=45

# Define the temperature thresholds and corresponding fan speeds
TEMP_THRESHOLDS=($CPU_TEMPERATURE_1 $CPU_TEMPERATURE_2 $CPU_TEMPERATURE_3 $CPU_TEMPERATURE_4)
FAN_SPEEDS=($FAN_SPEED_1 $FAN_SPEED_2 $FAN_SPEED_3 $FAN_SPEED_4 100) # Correspond aux seuils + vitesse max

# Check if the iDRAC host is set to 'local' or not then set the IDRAC_LOGIN_STRING accordingly
if [[ $IDRAC_HOST == "local" ]]
then
  # Check that the Docker host IPMI device (the iDRAC) has been exposed to the Docker container
  if [ ! -e "/dev/ipmi0" ] && [ ! -e "/dev/ipmi/0" ] && [ ! -e "/dev/ipmidev/0" ]; then
    echo "/!\ Could not open device at /dev/ipmi0 or /dev/ipmi/0 or /dev/ipmidev/0, check that you added the device to your Docker container or stop using local mode. Exiting." >&2
    exit 1
  fi
  IDRAC_LOGIN_STRING='open'
else
  echo "iDRAC/IPMI username: $IDRAC_USERNAME"
  echo "iDRAC/IPMI password: $IDRAC_PASSWORD"
  IDRAC_LOGIN_STRING="lanplus -H $IDRAC_HOST -U $IDRAC_USERNAME -P $IDRAC_PASSWORD"
fi

get_Dell_server_model

if [[ ! $SERVER_MANUFACTURER == "DELL" ]]
then
  echo "/!\ Your server isn't a Dell product. Exiting." >&2
  exit 1
fi

# Log main informations
echo "Server model: $SERVER_MANUFACTURER $SERVER_MODEL"
echo "iDRAC/IPMI host: $IDRAC_HOST"

# Log the check interval
echo "Check interval: ${CHECK_INTERVAL}s"
echo ""

# Define the interval for printing
readonly TABLE_HEADER_PRINT_INTERVAL=10
i=$TABLE_HEADER_PRINT_INTERVAL
# Set the flag used to check if the active fan control profile has changed
IS_DELL_FAN_CONTROL_PROFILE_APPLIED=true

# Check present sensors
IS_EXHAUST_TEMPERATURE_SENSOR_PRESENT=true
IS_CPU2_TEMPERATURE_SENSOR_PRESENT=true
retrieve_temperatures $IS_EXHAUST_TEMPERATURE_SENSOR_PRESENT $IS_CPU2_TEMPERATURE_SENSOR_PRESENT
if [ -z "$EXHAUST_TEMPERATURE" ]
then
  echo "No exhaust temperature sensor detected."
  IS_EXHAUST_TEMPERATURE_SENSOR_PRESENT=false
fi
if [ -z "$CPU2_TEMPERATURE" ]
then
  echo "No CPU2 temperature sensor detected."
  IS_CPU2_TEMPERATURE_SENSOR_PRESENT=false
fi
# Output new line to beautify output if one of the previous conditions have echoed
if ! $IS_EXHAUST_TEMPERATURE_SENSOR_PRESENT || ! $IS_CPU2_TEMPERATURE_SENSOR_PRESENT
then
  echo ""
fi

# Fonction pour régler la vitesse des ventilateurs
#set_fan_speed() {
#    local speed=$1
#    # Commande pour définir la vitesse des ventilateurs via l'iDRAC
#    # Par exemple: ipmitool raw command
#    ipmitool -I lanplus -H ${IDRAC_HOST} -U ${IDRAC_USERNAME} -P ${IDRAC_PASSWORD} raw 0x30 0x30 0x02 0xff ${speed}
#}

# Start monitoring
while true; do
  # Sleep for the specified interval before taking another reading
  sleep $CHECK_INTERVAL &
  SLEEP_PROCESS_PID=$!

  retrieve_temperatures $IS_EXHAUST_TEMPERATURE_SENSOR_PRESENT $IS_CPU2_TEMPERATURE_SENSOR_PRESENT

  # Define functions to check if CPU 1 and CPU 2 temperatures are above the threshold
  function CPU1_OVERHEAT () { [ $CPU1_TEMPERATURE -gt $CPU_TEMPERATURE_THRESHOLD ]; }
  if $IS_CPU2_TEMPERATURE_SENSOR_PRESENT
  then
    function CPU2_OVERHEAT () { [ $CPU2_TEMPERATURE -gt $CPU_TEMPERATURE_THRESHOLD ]; }
  fi

  # Initialize a variable to store the comments displayed when the fan control profile changed
  COMMENT=" -"
  # Check if CPU 1 is overheating then apply Dell default dynamic fan control profile if true
  if CPU1_OVERHEAT
  then
    apply_Dell_fan_control_profile

    if ! $IS_DELL_FAN_CONTROL_PROFILE_APPLIED
    then
      IS_DELL_FAN_CONTROL_PROFILE_APPLIED=true

      # If CPU 2 temperature sensor is present, check if it is overheating too.
      # Do not apply Dell default dynamic fan control profile as it has already been applied before
      if $IS_CPU2_TEMPERATURE_SENSOR_PRESENT && CPU2_OVERHEAT
      then
        COMMENT="CPU 1 and CPU 2 temperatures are too high, Dell default dynamic fan control profile applied for safety"
      else
        COMMENT="CPU 1 temperature is too high, Dell default dynamic fan control profile applied for safety"
      fi
    fi
  # If CPU 2 temperature sensor is present, check if it is overheating then apply Dell default dynamic fan control profile if true
  elif $IS_CPU2_TEMPERATURE_SENSOR_PRESENT && CPU2_OVERHEAT
  then
    apply_Dell_fan_control_profile

    if ! $IS_DELL_FAN_CONTROL_PROFILE_APPLIED
    then
      IS_DELL_FAN_CONTROL_PROFILE_APPLIED=true
      COMMENT="CPU 2 temperature is too high, Dell default dynamic fan control profile applied for safety"
    fi
  else
    # Adjust fan speed based on temperature thresholds
    for i in ${!TEMP_THRESHOLDS[@]}; do
        if [ $CPU1_TEMPERATURE -le ${TEMP_THRESHOLDS[$i]} ]; then
            set_fan_speed ${FAN_SPEEDS[$i]}
            break
        fi
    done
    
    # Si la température est supérieure à tous les seuils, définir la vitesse maximale
    if [ $CPU1_TEMPERATURE -gt ${TEMP_THRESHOLDS[-1]} ]; then
        set_fan_speed ${FAN_SPEEDS[-1]}
    fi
    
#    apply_user_fan_control_profile

    # Check if user fan control profile is applied then apply it if not
    if $IS_DELL_FAN_CONTROL_PROFILE_APPLIED
    then
      IS_DELL_FAN_CONTROL_PROFILE_APPLIED=false
      COMMENT="CPU temperature decreased and is now OK (<= $CPU_TEMPERATURE_THRESHOLD°C), user's fan control profile applied."
    fi
  fi

  # Enable or disable, depending on the user's choice, third-party PCIe card Dell default cooling response
  # No comment will be displayed on the change of this parameter since it is not related to the temperature of any device (CPU, GPU, etc...) but only to the settings made by the user when launching this Docker container
  if $DISABLE_THIRD_PARTY_PCIE_CARD_DELL_DEFAULT_COOLING_RESPONSE
  then
    disable_third_party_PCIe_card_Dell_default_cooling_response
    THIRD_PARTY_PCIE_CARD_DELL_DEFAULT_COOLING_RESPONSE_STATUS="Disabled"
  else
    enable_third_party_PCIe_card_Dell_default_cooling_response
    THIRD_PARTY_PCIE_CARD_DELL_DEFAULT_COOLING_RESPONSE_STATUS="Enabled"
  fi

  # Print temperatures, active fan control profile and comment if any change happened during last time interval
  if [ $i -eq $TABLE_HEADER_PRINT_INTERVAL ]
  then
    echo "                     ------- Temperatures -------"
    echo "    Date & time      Inlet  CPU 1  CPU 2  Exhaust          Active fan speed profile          Third-party PCIe card Dell default cooling response  Comment"
    i=0
  fi
  printf "%19s  %3d°C  %3d°C  %3s°C  %5s°C  %40s  %51s  %s\n" "$(date +"%d-%m-%Y %T")" $INLET_TEMPERATURE $CPU1_TEMPERATURE "$CPU2_TEMPERATURE" "$EXHAUST_TEMPERATURE" "$CURRENT_FAN_CONTROL_PROFILE" "$THIRD_PARTY_PCIE_CARD_DELL_DEFAULT_COOLING_RESPONSE_STATUS" "$COMMENT"
  ((i++))
  wait $SLEEP
done