Ajout version LXC et restructuration complète du projet
🚀 NOUVELLES FONCTIONNALITÉS : - Version LXC complète pour Proxmox avec installation automatisée - Script d'installation LXC avec interface colorée et vérifications - Service systemd avec configuration sécurisée - Script de désinstallation avec sauvegarde de config 📁 RESTRUCTURATION : - Séparation Docker/LXC dans des dossiers dédiés - Documentation spécialisée pour chaque version - Guide d'installation unifié (INSTALL.md) - README principal avec comparaison des versions 🐳 AMÉLIORATIONS DOCKER : - docker-compose.yml optimisé avec healthcheck - Documentation Docker détaillée - Configuration par variables d'environnement clarifiée 📦 FONCTIONNALITÉS LXC : - Installation en une commande - Intégration systemd native - Gestion des permissions et sécurité - Logs intégrés avec journalctl - Configuration via fichier d'environnement 🔧 OUTILS INCLUS : - Scripts d'installation/désinstallation - Healthchecks pour les deux versions - Documentation de dépannage - Comparatif des deux approches 🤖 Generated with [Claude Code](https://claude.ai/code) Co-Authored-By: Claude <noreply@anthropic.com>
This commit is contained in:
69
INSTALL.md
Normal file
69
INSTALL.md
Normal file
@@ -0,0 +1,69 @@
|
|||||||
|
# Guide d'installation
|
||||||
|
|
||||||
|
Choisissez votre méthode d'installation préférée :
|
||||||
|
|
||||||
|
## 🐳 Version Docker
|
||||||
|
|
||||||
|
**Avantages :**
|
||||||
|
- Installation simple avec Docker Compose
|
||||||
|
- Environment isolé et reproductible
|
||||||
|
- Gestion des versions via images Docker
|
||||||
|
- Intégration facile avec d'autres services
|
||||||
|
|
||||||
|
**→ [Guide Docker complet](docker/README-DOCKER.md)**
|
||||||
|
|
||||||
|
### Installation rapide Docker
|
||||||
|
|
||||||
|
```bash
|
||||||
|
# Cloner le repo
|
||||||
|
git clone <votre-repo>
|
||||||
|
cd Dell_iDRAC_fan_controller/docker
|
||||||
|
|
||||||
|
# Configurer
|
||||||
|
cp docker-compose.yml docker-compose.local.yml
|
||||||
|
nano docker-compose.local.yml
|
||||||
|
|
||||||
|
# Lancer
|
||||||
|
docker-compose -f docker-compose.local.yml up -d
|
||||||
|
```
|
||||||
|
|
||||||
|
---
|
||||||
|
|
||||||
|
## 📦 Version LXC (Proxmox)
|
||||||
|
|
||||||
|
**Avantages :**
|
||||||
|
- Performance native (pas d'overhead Docker)
|
||||||
|
- Intégration parfaite avec Proxmox
|
||||||
|
- Accès hardware direct
|
||||||
|
- Gestion avec systemd
|
||||||
|
|
||||||
|
**→ [Guide LXC complet](lxc/README-LXC.md)**
|
||||||
|
|
||||||
|
### Installation rapide LXC
|
||||||
|
|
||||||
|
```bash
|
||||||
|
# Dans un container LXC Ubuntu
|
||||||
|
wget -O - https://github.com/<votre-repo>/archive/main.tar.gz | tar -xz
|
||||||
|
cd Dell_iDRAC_fan_controller-main/lxc
|
||||||
|
chmod +x install-lxc.sh
|
||||||
|
./install-lxc.sh
|
||||||
|
```
|
||||||
|
|
||||||
|
---
|
||||||
|
|
||||||
|
## Comparaison rapide
|
||||||
|
|
||||||
|
| Critère | Docker | LXC |
|
||||||
|
|---------|--------|-----|
|
||||||
|
| **Facilité** | ⭐⭐⭐ | ⭐⭐ |
|
||||||
|
| **Performance** | ⭐⭐ | ⭐⭐⭐ |
|
||||||
|
| **Isolation** | ⭐⭐⭐ | ⭐⭐ |
|
||||||
|
| **Maintenance** | ⭐⭐⭐ | ⭐⭐ |
|
||||||
|
| **Proxmox** | ⭐⭐ | ⭐⭐⭐ |
|
||||||
|
| **Ressources** | ⭐⭐ | ⭐⭐⭐ |
|
||||||
|
|
||||||
|
## Support
|
||||||
|
|
||||||
|
- **Issues** : [GitHub Issues](https://github.com/<votre-repo>/issues)
|
||||||
|
- **Discussions** : [GitHub Discussions](https://github.com/<votre-repo>/discussions)
|
||||||
|
- **Original** : [Projet source](https://github.com/tigerblue77/Dell_iDRAC_fan_controller_Docker)
|
||||||
87
README.md
87
README.md
@@ -10,46 +10,81 @@ Fork de : https://github.com/tigerblue77/Dell_iDRAC_fan_controller_Docker.git
|
|||||||
- Configuration de 4 seuils de température avec vitesses correspondantes
|
- Configuration de 4 seuils de température avec vitesses correspondantes
|
||||||
- Gestion progressive de la vitesse des ventilateurs selon la température du CPU
|
- Gestion progressive de la vitesse des ventilateurs selon la température du CPU
|
||||||
|
|
||||||
|
## 🚀 Deux versions disponibles
|
||||||
|
|
||||||
|
| **Version Docker** | **Version LXC Proxmox** |
|
||||||
|
|-------------------|------------------------|
|
||||||
|
| 🐳 Container Docker classique | 📦 Container LXC natif |
|
||||||
|
| Images versionnées | Installation directe |
|
||||||
|
| `docker-compose` | `systemctl` |
|
||||||
|
| Isolation forte | Performance native |
|
||||||
|
| → [Documentation Docker](docker/) | → [Documentation LXC](lxc/) |
|
||||||
|
|
||||||
<!-- TABLE OF CONTENTS -->
|
<!-- TABLE OF CONTENTS -->
|
||||||
<details>
|
<details>
|
||||||
<summary>Table of Contents</summary>
|
<summary>Table des matières</summary>
|
||||||
<ol>
|
<ol>
|
||||||
<li><a href="#container-console-log-example">Container console log example</a></li>
|
<li><a href="#-deux-versions-disponibles">🚀 Deux versions disponibles</a></li>
|
||||||
<li><a href="#supported-architectures">Supported architectures</a></li>
|
<li><a href="#prérequis">Prérequis</a></li>
|
||||||
<li><a href="#usage">Usage</a></li>
|
<li><a href="#installation-rapide">Installation rapide</a></li>
|
||||||
<li><a href="#parameters">Parameters</a></li>
|
<li><a href="#paramètres">Paramètres</a></li>
|
||||||
<li><a href="#troubleshooting">Troubleshooting</a></li>
|
<li><a href="#dépannage">Dépannage</a></li>
|
||||||
<li><a href="#contributing">Contributing</a></li>
|
<li><a href="#container-console-log-example">Exemple de logs</a></li>
|
||||||
</ol>
|
</ol>
|
||||||
</details>
|
</details>
|
||||||
|
|
||||||
|
## Installation rapide
|
||||||
|
|
||||||
|
### 🐳 Version Docker
|
||||||
|
|
||||||
|
```bash
|
||||||
|
# Télécharger la configuration
|
||||||
|
wget https://raw.githubusercontent.com/votre-repo/main/docker/docker-compose.yml
|
||||||
|
|
||||||
|
# Modifier la configuration selon vos besoins
|
||||||
|
nano docker-compose.yml
|
||||||
|
|
||||||
|
# Lancer le container
|
||||||
|
docker-compose up -d
|
||||||
|
```
|
||||||
|
|
||||||
|
### 📦 Version LXC (Proxmox)
|
||||||
|
|
||||||
|
```bash
|
||||||
|
# Dans le container LXC Ubuntu
|
||||||
|
wget -O - https://github.com/votre-repo/archive/main.tar.gz | tar -xz
|
||||||
|
cd Dell_iDRAC_fan_controller-main/lxc
|
||||||
|
chmod +x install-lxc.sh
|
||||||
|
./install-lxc.sh
|
||||||
|
```
|
||||||
|
|
||||||
|
<p align="right">(<a href="#top">back to top</a>)</p>
|
||||||
|
|
||||||
|
## Prérequis
|
||||||
|
|
||||||
|
### Serveur Dell
|
||||||
|
- Dell PowerEdge avec iDRAC
|
||||||
|
- Support des commandes IPMI
|
||||||
|
- iDRAC 9 firmware < 3.30.30.30 (pour IPMI)
|
||||||
|
|
||||||
|
### Environnement
|
||||||
|
- **Docker** : Docker + Docker Compose
|
||||||
|
- **LXC** : Proxmox avec container privilégié
|
||||||
|
|
||||||
|
<p align="right">(<a href="#top">back to top</a>)</p>
|
||||||
|
|
||||||
## Container console log example
|
## Container console log example
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
<p align="right">(<a href="#top">back to top</a>)</p>
|
<p align="right">(<a href="#top">back to top</a>)</p>
|
||||||
|
|
||||||
<!-- PREREQUISITES -->
|
<!-- USAGE DÉTAILLÉ -->
|
||||||
## Prerequisites
|
## Configuration détaillée
|
||||||
### iDRAC version
|
|
||||||
|
|
||||||
This Docker container only works on Dell PowerEdge servers that support IPMI commands, i.e. < iDRAC 9 firmware 3.30.30.30.
|
### 🐳 Version Docker
|
||||||
|
|
||||||
<p align="right">(<a href="#top">back to top</a>)</p>
|
**1. Utilisation avec iDRAC local :**
|
||||||
|
|
||||||
<!-- SUPPORTED ARCHITECTURES -->
|
|
||||||
## Supported architectures
|
|
||||||
|
|
||||||
This Docker container is currently built and available for the following CPU architectures :
|
|
||||||
- AMD64
|
|
||||||
- ARM64
|
|
||||||
|
|
||||||
<p align="right">(<a href="#top">back to top</a>)</p>
|
|
||||||
|
|
||||||
<!-- USAGE -->
|
|
||||||
## Usage
|
|
||||||
|
|
||||||
1. with local iDRAC:
|
|
||||||
|
|
||||||
```bash
|
```bash
|
||||||
docker run -d \
|
docker run -d \
|
||||||
|
|||||||
167
docker/Dell_iDRAC_fan_controller.sh
Executable file
167
docker/Dell_iDRAC_fan_controller.sh
Executable file
@@ -0,0 +1,167 @@
|
|||||||
|
#!/bin/bash
|
||||||
|
|
||||||
|
# Enable strict bash mode to stop the script if an uninitialized variable is used, if a command fails, or if a command with a pipe fails
|
||||||
|
# Not working in some setups : https://github.com/tigerblue77/Dell_iDRAC_fan_controller/issues/48
|
||||||
|
# set -euo pipefail
|
||||||
|
|
||||||
|
source functions.sh
|
||||||
|
|
||||||
|
# Trap the signals for container exit and run gracefull_exit function
|
||||||
|
trap 'gracefull_exit' SIGQUIT SIGKILL SIGTERM
|
||||||
|
|
||||||
|
# Prepare, format and define initial variables
|
||||||
|
|
||||||
|
# readonly DELL_FRESH_AIR_COMPLIANCE=45
|
||||||
|
|
||||||
|
# Define the temperature thresholds and corresponding fan speeds
|
||||||
|
TEMP_THRESHOLDS=($CPU_TEMPERATURE_1 $CPU_TEMPERATURE_2 $CPU_TEMPERATURE_3 $CPU_TEMPERATURE_4)
|
||||||
|
FAN_SPEEDS=($FAN_SPEED_1 $FAN_SPEED_2 $FAN_SPEED_3 $FAN_SPEED_4 100) # Correspond aux seuils + vitesse max
|
||||||
|
|
||||||
|
# Check if the iDRAC host is set to 'local' or not then set the IDRAC_LOGIN_STRING accordingly
|
||||||
|
if [[ $IDRAC_HOST == "local" ]]
|
||||||
|
then
|
||||||
|
# Check that the Docker host IPMI device (the iDRAC) has been exposed to the Docker container
|
||||||
|
if [ ! -e "/dev/ipmi0" ] && [ ! -e "/dev/ipmi/0" ] && [ ! -e "/dev/ipmidev/0" ]; then
|
||||||
|
echo "/!\ Could not open device at /dev/ipmi0 or /dev/ipmi/0 or /dev/ipmidev/0, check that you added the device to your Docker container or stop using local mode. Exiting." >&2
|
||||||
|
exit 1
|
||||||
|
fi
|
||||||
|
IDRAC_LOGIN_STRING='open'
|
||||||
|
else
|
||||||
|
echo "iDRAC/IPMI username: $IDRAC_USERNAME"
|
||||||
|
echo "iDRAC/IPMI password: $IDRAC_PASSWORD"
|
||||||
|
IDRAC_LOGIN_STRING="lanplus -H $IDRAC_HOST -U $IDRAC_USERNAME -P $IDRAC_PASSWORD"
|
||||||
|
fi
|
||||||
|
|
||||||
|
get_Dell_server_model
|
||||||
|
|
||||||
|
if [[ ! $SERVER_MANUFACTURER == "DELL" ]]
|
||||||
|
then
|
||||||
|
echo "/!\ Your server isn't a Dell product. Exiting." >&2
|
||||||
|
exit 1
|
||||||
|
fi
|
||||||
|
|
||||||
|
# Log main informations
|
||||||
|
echo "Server model: $SERVER_MANUFACTURER $SERVER_MODEL"
|
||||||
|
echo "iDRAC/IPMI host: $IDRAC_HOST"
|
||||||
|
|
||||||
|
# Log the check interval
|
||||||
|
echo "Check interval: ${CHECK_INTERVAL}s"
|
||||||
|
echo ""
|
||||||
|
|
||||||
|
# Define the interval for printing
|
||||||
|
readonly TABLE_HEADER_PRINT_INTERVAL=10
|
||||||
|
i=$TABLE_HEADER_PRINT_INTERVAL
|
||||||
|
# Set the flag used to check if the active fan control profile has changed
|
||||||
|
IS_DELL_FAN_CONTROL_PROFILE_APPLIED=true
|
||||||
|
|
||||||
|
# Check present sensors
|
||||||
|
IS_EXHAUST_TEMPERATURE_SENSOR_PRESENT=true
|
||||||
|
IS_CPU2_TEMPERATURE_SENSOR_PRESENT=true
|
||||||
|
retrieve_temperatures $IS_EXHAUST_TEMPERATURE_SENSOR_PRESENT $IS_CPU2_TEMPERATURE_SENSOR_PRESENT
|
||||||
|
if [ -z "$EXHAUST_TEMPERATURE" ]
|
||||||
|
then
|
||||||
|
echo "No exhaust temperature sensor detected."
|
||||||
|
IS_EXHAUST_TEMPERATURE_SENSOR_PRESENT=false
|
||||||
|
fi
|
||||||
|
if [ -z "$CPU2_TEMPERATURE" ]
|
||||||
|
then
|
||||||
|
echo "No CPU2 temperature sensor detected."
|
||||||
|
IS_CPU2_TEMPERATURE_SENSOR_PRESENT=false
|
||||||
|
fi
|
||||||
|
# Output new line to beautify output if one of the previous conditions have echoed
|
||||||
|
if ! $IS_EXHAUST_TEMPERATURE_SENSOR_PRESENT || ! $IS_CPU2_TEMPERATURE_SENSOR_PRESENT
|
||||||
|
then
|
||||||
|
echo ""
|
||||||
|
fi
|
||||||
|
|
||||||
|
|
||||||
|
# Start monitoring
|
||||||
|
while true; do
|
||||||
|
# Sleep for the specified interval before taking another reading
|
||||||
|
sleep $CHECK_INTERVAL &
|
||||||
|
SLEEP_PROCESS_PID=$!
|
||||||
|
|
||||||
|
retrieve_temperatures $IS_EXHAUST_TEMPERATURE_SENSOR_PRESENT $IS_CPU2_TEMPERATURE_SENSOR_PRESENT
|
||||||
|
|
||||||
|
# Define functions to check if CPU 1 and CPU 2 temperatures are above the threshold
|
||||||
|
function CPU1_OVERHEAT () { [ $CPU1_TEMPERATURE -gt $CPU_TEMPERATURE_THRESHOLD ]; }
|
||||||
|
if $IS_CPU2_TEMPERATURE_SENSOR_PRESENT
|
||||||
|
then
|
||||||
|
function CPU2_OVERHEAT () { [ $CPU2_TEMPERATURE -gt $CPU_TEMPERATURE_THRESHOLD ]; }
|
||||||
|
fi
|
||||||
|
|
||||||
|
# Initialize a variable to store the comments displayed when the fan control profile changed
|
||||||
|
COMMENT=" -"
|
||||||
|
# Check if CPU 1 is overheating then apply Dell default dynamic fan control profile if true
|
||||||
|
if CPU1_OVERHEAT
|
||||||
|
then
|
||||||
|
apply_Dell_fan_control_profile
|
||||||
|
|
||||||
|
if ! $IS_DELL_FAN_CONTROL_PROFILE_APPLIED
|
||||||
|
then
|
||||||
|
IS_DELL_FAN_CONTROL_PROFILE_APPLIED=true
|
||||||
|
|
||||||
|
# If CPU 2 temperature sensor is present, check if it is overheating too.
|
||||||
|
# Do not apply Dell default dynamic fan control profile as it has already been applied before
|
||||||
|
if $IS_CPU2_TEMPERATURE_SENSOR_PRESENT && CPU2_OVERHEAT
|
||||||
|
then
|
||||||
|
COMMENT="CPU 1 and CPU 2 temperatures are too high, Dell default dynamic fan control profile applied for safety"
|
||||||
|
else
|
||||||
|
COMMENT="CPU 1 temperature is too high, Dell default dynamic fan control profile applied for safety"
|
||||||
|
fi
|
||||||
|
fi
|
||||||
|
# If CPU 2 temperature sensor is present, check if it is overheating then apply Dell default dynamic fan control profile if true
|
||||||
|
elif $IS_CPU2_TEMPERATURE_SENSOR_PRESENT && CPU2_OVERHEAT
|
||||||
|
then
|
||||||
|
apply_Dell_fan_control_profile
|
||||||
|
|
||||||
|
if ! $IS_DELL_FAN_CONTROL_PROFILE_APPLIED
|
||||||
|
then
|
||||||
|
IS_DELL_FAN_CONTROL_PROFILE_APPLIED=true
|
||||||
|
COMMENT="CPU 2 temperature is too high, Dell default dynamic fan control profile applied for safety"
|
||||||
|
fi
|
||||||
|
else
|
||||||
|
# Adjust fan speed based on temperature thresholds
|
||||||
|
for i in ${!TEMP_THRESHOLDS[@]}; do
|
||||||
|
if [ $CPU1_TEMPERATURE -le ${TEMP_THRESHOLDS[$i]} ]; then
|
||||||
|
set_fan_speed ${FAN_SPEEDS[$i]}
|
||||||
|
break
|
||||||
|
fi
|
||||||
|
done
|
||||||
|
|
||||||
|
# Si la température est supérieure à tous les seuils, définir la vitesse maximale
|
||||||
|
if [ $CPU1_TEMPERATURE -gt ${TEMP_THRESHOLDS[-1]} ]; then
|
||||||
|
set_fan_speed ${FAN_SPEEDS[-1]}
|
||||||
|
fi
|
||||||
|
|
||||||
|
|
||||||
|
# Check if user fan control profile is applied then apply it if not
|
||||||
|
if $IS_DELL_FAN_CONTROL_PROFILE_APPLIED
|
||||||
|
then
|
||||||
|
IS_DELL_FAN_CONTROL_PROFILE_APPLIED=false
|
||||||
|
COMMENT="CPU temperature decreased and is now OK (<= $CPU_TEMPERATURE_THRESHOLD°C), user's fan control profile applied."
|
||||||
|
fi
|
||||||
|
fi
|
||||||
|
|
||||||
|
# Enable or disable, depending on the user's choice, third-party PCIe card Dell default cooling response
|
||||||
|
# No comment will be displayed on the change of this parameter since it is not related to the temperature of any device (CPU, GPU, etc...) but only to the settings made by the user when launching this Docker container
|
||||||
|
if $DISABLE_THIRD_PARTY_PCIE_CARD_DELL_DEFAULT_COOLING_RESPONSE
|
||||||
|
then
|
||||||
|
disable_third_party_PCIe_card_Dell_default_cooling_response
|
||||||
|
THIRD_PARTY_PCIE_CARD_DELL_DEFAULT_COOLING_RESPONSE_STATUS="Disabled"
|
||||||
|
else
|
||||||
|
enable_third_party_PCIe_card_Dell_default_cooling_response
|
||||||
|
THIRD_PARTY_PCIE_CARD_DELL_DEFAULT_COOLING_RESPONSE_STATUS="Enabled"
|
||||||
|
fi
|
||||||
|
|
||||||
|
# Print temperatures, active fan control profile and comment if any change happened during last time interval
|
||||||
|
if [ $i -eq $TABLE_HEADER_PRINT_INTERVAL ]
|
||||||
|
then
|
||||||
|
echo " ------- Temperatures -------"
|
||||||
|
echo " Date & time Inlet CPU 1 CPU 2 Exhaust Active fan speed profile Third-party PCIe card Dell default cooling response Comment"
|
||||||
|
i=0
|
||||||
|
fi
|
||||||
|
printf "%19s %3d°C %3d°C %3s°C %5s°C %40s %51s %s\n" "$(date +"%d-%m-%Y %T")" $INLET_TEMPERATURE $CPU1_TEMPERATURE "$CPU2_TEMPERATURE" "$EXHAUST_TEMPERATURE" "$CURRENT_FAN_CONTROL_PROFILE" "$THIRD_PARTY_PCIE_CARD_DELL_DEFAULT_COOLING_RESPONSE_STATUS" "$COMMENT"
|
||||||
|
((i++))
|
||||||
|
wait $SLEEP_PROCESS_PID
|
||||||
|
done
|
||||||
173
docker/README-DOCKER.md
Normal file
173
docker/README-DOCKER.md
Normal file
@@ -0,0 +1,173 @@
|
|||||||
|
# Version Docker
|
||||||
|
|
||||||
|
Documentation spécifique pour l'installation et l'utilisation avec Docker.
|
||||||
|
|
||||||
|
## Fichiers inclus
|
||||||
|
|
||||||
|
- `Dockerfile` : Image Docker
|
||||||
|
- `Dell_iDRAC_fan_controller.sh` : Script principal
|
||||||
|
- `functions.sh` : Fonctions utilitaires
|
||||||
|
- `healthcheck.sh` : Vérification de santé
|
||||||
|
|
||||||
|
## Installation Docker
|
||||||
|
|
||||||
|
### 1. Construction de l'image
|
||||||
|
|
||||||
|
```bash
|
||||||
|
cd docker/
|
||||||
|
docker build -t idrac-fan-controller .
|
||||||
|
```
|
||||||
|
|
||||||
|
### 2. Utilisation avec Docker Compose (recommandé)
|
||||||
|
|
||||||
|
**Créer `docker-compose.yml` :**
|
||||||
|
|
||||||
|
```yml
|
||||||
|
version: '3.8'
|
||||||
|
|
||||||
|
services:
|
||||||
|
idrac_fan_controller:
|
||||||
|
build: .
|
||||||
|
container_name: idrac_fan_controller
|
||||||
|
restart: unless-stopped
|
||||||
|
environment:
|
||||||
|
# Connexion iDRAC
|
||||||
|
- IDRAC_HOST=local # ou IP pour distant
|
||||||
|
- IDRAC_USERNAME=root # si distant
|
||||||
|
- IDRAC_PASSWORD=calvin # si distant
|
||||||
|
|
||||||
|
# Seuils de température (°C)
|
||||||
|
- CPU_TEMPERATURE_1=30
|
||||||
|
- CPU_TEMPERATURE_2=40
|
||||||
|
- CPU_TEMPERATURE_3=50
|
||||||
|
- CPU_TEMPERATURE_4=60
|
||||||
|
|
||||||
|
# Vitesses correspondantes (%)
|
||||||
|
- FAN_SPEED_1=10
|
||||||
|
- FAN_SPEED_2=30
|
||||||
|
- FAN_SPEED_3=60
|
||||||
|
- FAN_SPEED_4=80
|
||||||
|
|
||||||
|
# Seuil de sécurité
|
||||||
|
- CPU_TEMPERATURE_THRESHOLD=70
|
||||||
|
|
||||||
|
# Autres paramètres
|
||||||
|
- CHECK_INTERVAL=60
|
||||||
|
- DISABLE_THIRD_PARTY_PCIE_CARD_DELL_DEFAULT_COOLING_RESPONSE=false
|
||||||
|
|
||||||
|
devices:
|
||||||
|
- /dev/ipmi0:/dev/ipmi0:rw # Pour iDRAC local
|
||||||
|
|
||||||
|
# Optionnel : logs persistants
|
||||||
|
volumes:
|
||||||
|
- ./logs:/var/log/idrac
|
||||||
|
```
|
||||||
|
|
||||||
|
### 3. Lancement
|
||||||
|
|
||||||
|
```bash
|
||||||
|
# Démarrer
|
||||||
|
docker-compose up -d
|
||||||
|
|
||||||
|
# Voir les logs
|
||||||
|
docker-compose logs -f
|
||||||
|
|
||||||
|
# Arrêter
|
||||||
|
docker-compose down
|
||||||
|
```
|
||||||
|
|
||||||
|
## Configuration par variables d'environnement
|
||||||
|
|
||||||
|
Toutes les variables peuvent être configurées via l'environnement :
|
||||||
|
|
||||||
|
```bash
|
||||||
|
# Exemple pour iDRAC distant
|
||||||
|
docker run -d \
|
||||||
|
--name idrac_fan_controller \
|
||||||
|
--restart unless-stopped \
|
||||||
|
-e IDRAC_HOST=192.168.1.100 \
|
||||||
|
-e IDRAC_USERNAME=root \
|
||||||
|
-e IDRAC_PASSWORD=calvin \
|
||||||
|
-e CPU_TEMPERATURE_1=30 \
|
||||||
|
-e CPU_TEMPERATURE_2=40 \
|
||||||
|
-e CPU_TEMPERATURE_3=50 \
|
||||||
|
-e CPU_TEMPERATURE_4=60 \
|
||||||
|
-e FAN_SPEED_1=10 \
|
||||||
|
-e FAN_SPEED_2=30 \
|
||||||
|
-e FAN_SPEED_3=60 \
|
||||||
|
-e FAN_SPEED_4=80 \
|
||||||
|
-e CPU_TEMPERATURE_THRESHOLD=70 \
|
||||||
|
-e CHECK_INTERVAL=60 \
|
||||||
|
idrac-fan-controller
|
||||||
|
```
|
||||||
|
|
||||||
|
## Gestion
|
||||||
|
|
||||||
|
### Commandes utiles
|
||||||
|
|
||||||
|
```bash
|
||||||
|
# État du container
|
||||||
|
docker-compose ps
|
||||||
|
|
||||||
|
# Logs en temps réel
|
||||||
|
docker-compose logs -f idrac_fan_controller
|
||||||
|
|
||||||
|
# Redémarrer
|
||||||
|
docker-compose restart idrac_fan_controller
|
||||||
|
|
||||||
|
# Shell dans le container
|
||||||
|
docker-compose exec idrac_fan_controller bash
|
||||||
|
|
||||||
|
# Test de santé
|
||||||
|
docker-compose exec idrac_fan_controller ./healthcheck.sh
|
||||||
|
```
|
||||||
|
|
||||||
|
### Mise à jour
|
||||||
|
|
||||||
|
```bash
|
||||||
|
# Reconstruire l'image
|
||||||
|
docker-compose build
|
||||||
|
|
||||||
|
# Redémarrer avec la nouvelle image
|
||||||
|
docker-compose up -d
|
||||||
|
```
|
||||||
|
|
||||||
|
## Dépannage Docker
|
||||||
|
|
||||||
|
### Vérification de l'accès IPMI
|
||||||
|
|
||||||
|
```bash
|
||||||
|
# Dans le container
|
||||||
|
docker-compose exec idrac_fan_controller ls -la /dev/ipmi*
|
||||||
|
|
||||||
|
# Test ipmitool
|
||||||
|
docker-compose exec idrac_fan_controller ipmitool fru
|
||||||
|
```
|
||||||
|
|
||||||
|
### Erreurs communes
|
||||||
|
|
||||||
|
**"Could not open device at /dev/ipmi0"**
|
||||||
|
```bash
|
||||||
|
# Vérifier sur l'hôte
|
||||||
|
ls -la /dev/ipmi*
|
||||||
|
|
||||||
|
# Vérifier les permissions
|
||||||
|
docker-compose exec idrac_fan_controller ls -la /dev/ipmi*
|
||||||
|
```
|
||||||
|
|
||||||
|
**Container qui s'arrête**
|
||||||
|
```bash
|
||||||
|
# Voir les logs
|
||||||
|
docker-compose logs idrac_fan_controller
|
||||||
|
|
||||||
|
# Mode debug
|
||||||
|
docker-compose run --rm idrac_fan_controller bash
|
||||||
|
```
|
||||||
|
|
||||||
|
## Avantages Docker
|
||||||
|
|
||||||
|
- **Isolation** : Environment isolé
|
||||||
|
- **Reproductibilité** : Même environnement partout
|
||||||
|
- **Versioning** : Images versionnées
|
||||||
|
- **Rollback** : Retour en arrière facile
|
||||||
|
- **Orchestration** : Intégration avec autres services
|
||||||
53
docker/docker-compose.yml
Normal file
53
docker/docker-compose.yml
Normal file
@@ -0,0 +1,53 @@
|
|||||||
|
version: '3.8'
|
||||||
|
|
||||||
|
services:
|
||||||
|
idrac_fan_controller:
|
||||||
|
build: .
|
||||||
|
container_name: idrac_fan_controller
|
||||||
|
restart: unless-stopped
|
||||||
|
|
||||||
|
environment:
|
||||||
|
# Connexion iDRAC
|
||||||
|
- IDRAC_HOST=local # "local" ou IP pour distant (ex: 192.168.1.100)
|
||||||
|
- IDRAC_USERNAME=root # Requis seulement si IDRAC_HOST != "local"
|
||||||
|
- IDRAC_PASSWORD=calvin # Requis seulement si IDRAC_HOST != "local"
|
||||||
|
|
||||||
|
# === Seuils de température (°C) ===
|
||||||
|
# Température <= CPU_TEMPERATURE_1 → vitesse FAN_SPEED_1
|
||||||
|
- CPU_TEMPERATURE_1=30
|
||||||
|
# Température <= CPU_TEMPERATURE_2 → vitesse FAN_SPEED_2
|
||||||
|
- CPU_TEMPERATURE_2=40
|
||||||
|
# Température <= CPU_TEMPERATURE_3 → vitesse FAN_SPEED_3
|
||||||
|
- CPU_TEMPERATURE_3=50
|
||||||
|
# Température <= CPU_TEMPERATURE_4 → vitesse FAN_SPEED_4
|
||||||
|
- CPU_TEMPERATURE_4=60
|
||||||
|
|
||||||
|
# === Vitesses des ventilateurs (%) ===
|
||||||
|
- FAN_SPEED_1=10 # Vitesse minimale
|
||||||
|
- FAN_SPEED_2=30
|
||||||
|
- FAN_SPEED_3=60
|
||||||
|
- FAN_SPEED_4=80 # Si > CPU_TEMPERATURE_4 → 100%
|
||||||
|
|
||||||
|
# === Seuil de sécurité ===
|
||||||
|
# Si température > CPU_TEMPERATURE_THRESHOLD → mode Dell par défaut
|
||||||
|
- CPU_TEMPERATURE_THRESHOLD=70
|
||||||
|
|
||||||
|
# === Autres paramètres ===
|
||||||
|
- CHECK_INTERVAL=60 # Secondes entre chaque vérification
|
||||||
|
- DISABLE_THIRD_PARTY_PCIE_CARD_DELL_DEFAULT_COOLING_RESPONSE=false
|
||||||
|
|
||||||
|
# Accès au périphérique IPMI (requis pour IDRAC_HOST=local)
|
||||||
|
devices:
|
||||||
|
- /dev/ipmi0:/dev/ipmi0:rw
|
||||||
|
|
||||||
|
# Logs persistants (optionnel)
|
||||||
|
volumes:
|
||||||
|
- ./logs:/var/log/idrac
|
||||||
|
|
||||||
|
# Healthcheck intégré
|
||||||
|
healthcheck:
|
||||||
|
test: ["CMD", "/app/healthcheck.sh"]
|
||||||
|
interval: 30s
|
||||||
|
timeout: 10s
|
||||||
|
retries: 3
|
||||||
|
start_period: 10s
|
||||||
105
docker/functions.sh
Executable file
105
docker/functions.sh
Executable file
@@ -0,0 +1,105 @@
|
|||||||
|
# This function applies Dell's default dynamic fan control profile
|
||||||
|
function apply_Dell_fan_control_profile () {
|
||||||
|
# Use ipmitool to send the raw command to set fan control to Dell default
|
||||||
|
ipmitool -I $IDRAC_LOGIN_STRING raw 0x30 0x30 0x01 0x01 > /dev/null
|
||||||
|
CURRENT_FAN_CONTROL_PROFILE="Dell default dynamic fan control profile"
|
||||||
|
}
|
||||||
|
|
||||||
|
# This function applies a user-specified static fan control profile
|
||||||
|
function apply_user_fan_control_profile () {
|
||||||
|
# Use ipmitool to send the raw command to set fan control to user-specified value
|
||||||
|
ipmitool -I $IDRAC_LOGIN_STRING raw 0x30 0x30 0x01 0x00 > /dev/null
|
||||||
|
ipmitool -I $IDRAC_LOGIN_STRING raw 0x30 0x30 0x02 0xff $HEXADECIMAL_FAN_SPEED > /dev/null
|
||||||
|
CURRENT_FAN_CONTROL_PROFILE="User static fan control profile ($DECIMAL_FAN_SPEED%)"
|
||||||
|
}
|
||||||
|
|
||||||
|
# This function sets the fan speed to a specified value
|
||||||
|
# Usage: set_fan_speed <decimal_speed>
|
||||||
|
function set_fan_speed () {
|
||||||
|
local SPEED=$1
|
||||||
|
local HEX_SPEED=$(convert_decimal_value_to_hexadecimal $SPEED)
|
||||||
|
ipmitool -I $IDRAC_LOGIN_STRING raw 0x30 0x30 0x01 0x00 > /dev/null
|
||||||
|
ipmitool -I $IDRAC_LOGIN_STRING raw 0x30 0x30 0x02 0xff $HEX_SPEED > /dev/null
|
||||||
|
CURRENT_FAN_CONTROL_PROFILE="User static fan control profile ($SPEED%)"
|
||||||
|
}
|
||||||
|
|
||||||
|
# Convert first parameter given ($DECIMAL_NUMBER) to hexadecimal
|
||||||
|
# Usage : convert_decimal_value_to_hexadecimal $DECIMAL_NUMBER
|
||||||
|
# Returns : hexadecimal value of DECIMAL_NUMBER
|
||||||
|
function convert_decimal_value_to_hexadecimal () {
|
||||||
|
local DECIMAL_NUMBER=$1
|
||||||
|
local HEXADECIMAL_NUMBER=$(printf '0x%02x' $DECIMAL_NUMBER)
|
||||||
|
echo $HEXADECIMAL_NUMBER
|
||||||
|
}
|
||||||
|
|
||||||
|
# Retrieve temperature sensors data using ipmitool
|
||||||
|
# Usage : retrieve_temperatures $IS_EXHAUST_TEMPERATURE_SENSOR_PRESENT $IS_CPU2_TEMPERATURE_SENSOR_PRESENT
|
||||||
|
function retrieve_temperatures () {
|
||||||
|
if (( $# != 2 ))
|
||||||
|
then
|
||||||
|
printf "Illegal number of parameters.\nUsage: retrieve_temperatures \$IS_EXHAUST_TEMPERATURE_SENSOR_PRESENT \$IS_CPU2_TEMPERATURE_SENSOR_PRESENT" >&2
|
||||||
|
return 1
|
||||||
|
fi
|
||||||
|
local IS_EXHAUST_TEMPERATURE_SENSOR_PRESENT=$1
|
||||||
|
local IS_CPU2_TEMPERATURE_SENSOR_PRESENT=$2
|
||||||
|
|
||||||
|
local DATA=$(ipmitool -I $IDRAC_LOGIN_STRING sdr type temperature | grep degrees)
|
||||||
|
|
||||||
|
# Parse CPU data
|
||||||
|
local CPU_DATA=$(echo "$DATA" | grep "3\." | grep -Po '\d{2}')
|
||||||
|
CPU1_TEMPERATURE=$(echo $CPU_DATA | awk '{print $1;}')
|
||||||
|
if $IS_CPU2_TEMPERATURE_SENSOR_PRESENT
|
||||||
|
then
|
||||||
|
CPU2_TEMPERATURE=$(echo $CPU_DATA | awk '{print $2;}')
|
||||||
|
else
|
||||||
|
CPU2_TEMPERATURE="-"
|
||||||
|
fi
|
||||||
|
|
||||||
|
# Parse inlet temperature data
|
||||||
|
INLET_TEMPERATURE=$(echo "$DATA" | grep Inlet | grep -Po '\d{2}' | tail -1)
|
||||||
|
|
||||||
|
# If exhaust temperature sensor is present, parse its temperature data
|
||||||
|
if $IS_EXHAUST_TEMPERATURE_SENSOR_PRESENT
|
||||||
|
then
|
||||||
|
EXHAUST_TEMPERATURE=$(echo "$DATA" | grep Exhaust | grep -Po '\d{2}' | tail -1)
|
||||||
|
else
|
||||||
|
EXHAUST_TEMPERATURE="-"
|
||||||
|
fi
|
||||||
|
}
|
||||||
|
|
||||||
|
function enable_third_party_PCIe_card_Dell_default_cooling_response () {
|
||||||
|
# We could check the current cooling response before applying but it's not very useful so let's skip the test and apply directly
|
||||||
|
ipmitool -I $IDRAC_LOGIN_STRING raw 0x30 0xce 0x00 0x16 0x05 0x00 0x00 0x00 0x05 0x00 0x00 0x00 0x00 > /dev/null
|
||||||
|
}
|
||||||
|
|
||||||
|
function disable_third_party_PCIe_card_Dell_default_cooling_response () {
|
||||||
|
# We could check the current cooling response before applying but it's not very useful so let's skip the test and apply directly
|
||||||
|
ipmitool -I $IDRAC_LOGIN_STRING raw 0x30 0xce 0x00 0x16 0x05 0x00 0x00 0x00 0x05 0x00 0x01 0x00 0x00 > /dev/null
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
|
# Prepare traps in case of container exit
|
||||||
|
function gracefull_exit () {
|
||||||
|
apply_Dell_fan_control_profile
|
||||||
|
enable_third_party_PCIe_card_Dell_default_cooling_response
|
||||||
|
echo "/!\ WARNING /!\ Container stopped, Dell default dynamic fan control profile applied for safety."
|
||||||
|
exit 0
|
||||||
|
}
|
||||||
|
|
||||||
|
# Helps debugging when people are posting their output
|
||||||
|
function get_Dell_server_model () {
|
||||||
|
IPMI_FRU_content=$(ipmitool -I $IDRAC_LOGIN_STRING fru 2>/dev/null) # FRU stands for "Field Replaceable Unit"
|
||||||
|
|
||||||
|
SERVER_MANUFACTURER=$(echo "$IPMI_FRU_content" | grep "Product Manufacturer" | awk -F ': ' '{print $2}')
|
||||||
|
SERVER_MODEL=$(echo "$IPMI_FRU_content" | grep "Product Name" | awk -F ': ' '{print $2}')
|
||||||
|
|
||||||
|
# Check if SERVER_MANUFACTURER is empty, if yes, assign value based on "Board Mfg"
|
||||||
|
if [ -z "$SERVER_MANUFACTURER" ]; then
|
||||||
|
SERVER_MANUFACTURER=$(echo "$IPMI_FRU_content" | tr -s ' ' | grep "Board Mfg :" | awk -F ': ' '{print $2}')
|
||||||
|
fi
|
||||||
|
|
||||||
|
# Check if SERVER_MODEL is empty, if yes, assign value based on "Board Product"
|
||||||
|
if [ -z "$SERVER_MODEL" ]; then
|
||||||
|
SERVER_MODEL=$(echo "$IPMI_FRU_content" | tr -s ' ' | grep "Board Product :" | awk -F ': ' '{print $2}')
|
||||||
|
fi
|
||||||
|
}
|
||||||
24
docker/healthcheck.sh
Executable file
24
docker/healthcheck.sh
Executable file
@@ -0,0 +1,24 @@
|
|||||||
|
#!/bin/bash
|
||||||
|
|
||||||
|
# Enable strict bash mode to stop the script if an uninitialized variable is used, if a command fails, or if a command with a pipe fails
|
||||||
|
# Not working in some setups : https://github.com/tigerblue77/Dell_iDRAC_fan_controller/issues/48
|
||||||
|
# set -euo pipefail
|
||||||
|
|
||||||
|
source functions.sh
|
||||||
|
|
||||||
|
# Check if the iDRAC host is set to 'local' or not then set the IDRAC_LOGIN_STRING accordingly
|
||||||
|
if [[ $IDRAC_HOST == "local" ]]
|
||||||
|
then
|
||||||
|
# Check that the Docker host IPMI device (the iDRAC) has been exposed to the Docker container
|
||||||
|
if [ ! -e "/dev/ipmi0" ] && [ ! -e "/dev/ipmi/0" ] && [ ! -e "/dev/ipmidev/0" ]; then
|
||||||
|
echo "/!\ Could not open device at /dev/ipmi0 or /dev/ipmi/0 or /dev/ipmidev/0, check that you added the device to your Docker container or stop using local mode. Exiting." >&2
|
||||||
|
exit 1
|
||||||
|
fi
|
||||||
|
IDRAC_LOGIN_STRING='open'
|
||||||
|
else
|
||||||
|
echo "iDRAC/IPMI username: $IDRAC_USERNAME"
|
||||||
|
echo "iDRAC/IPMI password: $IDRAC_PASSWORD"
|
||||||
|
IDRAC_LOGIN_STRING="lanplus -H $IDRAC_HOST -U $IDRAC_USERNAME -P $IDRAC_PASSWORD"
|
||||||
|
fi
|
||||||
|
|
||||||
|
ipmitool -I $IDRAC_LOGIN_STRING sdr type temperature
|
||||||
167
lxc/Dell_iDRAC_fan_controller.sh
Executable file
167
lxc/Dell_iDRAC_fan_controller.sh
Executable file
@@ -0,0 +1,167 @@
|
|||||||
|
#!/bin/bash
|
||||||
|
|
||||||
|
# Enable strict bash mode to stop the script if an uninitialized variable is used, if a command fails, or if a command with a pipe fails
|
||||||
|
# Not working in some setups : https://github.com/tigerblue77/Dell_iDRAC_fan_controller/issues/48
|
||||||
|
# set -euo pipefail
|
||||||
|
|
||||||
|
source functions.sh
|
||||||
|
|
||||||
|
# Trap the signals for container exit and run gracefull_exit function
|
||||||
|
trap 'gracefull_exit' SIGQUIT SIGKILL SIGTERM
|
||||||
|
|
||||||
|
# Prepare, format and define initial variables
|
||||||
|
|
||||||
|
# readonly DELL_FRESH_AIR_COMPLIANCE=45
|
||||||
|
|
||||||
|
# Define the temperature thresholds and corresponding fan speeds
|
||||||
|
TEMP_THRESHOLDS=($CPU_TEMPERATURE_1 $CPU_TEMPERATURE_2 $CPU_TEMPERATURE_3 $CPU_TEMPERATURE_4)
|
||||||
|
FAN_SPEEDS=($FAN_SPEED_1 $FAN_SPEED_2 $FAN_SPEED_3 $FAN_SPEED_4 100) # Correspond aux seuils + vitesse max
|
||||||
|
|
||||||
|
# Check if the iDRAC host is set to 'local' or not then set the IDRAC_LOGIN_STRING accordingly
|
||||||
|
if [[ $IDRAC_HOST == "local" ]]
|
||||||
|
then
|
||||||
|
# Check that the Docker host IPMI device (the iDRAC) has been exposed to the Docker container
|
||||||
|
if [ ! -e "/dev/ipmi0" ] && [ ! -e "/dev/ipmi/0" ] && [ ! -e "/dev/ipmidev/0" ]; then
|
||||||
|
echo "/!\ Could not open device at /dev/ipmi0 or /dev/ipmi/0 or /dev/ipmidev/0, check that you added the device to your Docker container or stop using local mode. Exiting." >&2
|
||||||
|
exit 1
|
||||||
|
fi
|
||||||
|
IDRAC_LOGIN_STRING='open'
|
||||||
|
else
|
||||||
|
echo "iDRAC/IPMI username: $IDRAC_USERNAME"
|
||||||
|
echo "iDRAC/IPMI password: $IDRAC_PASSWORD"
|
||||||
|
IDRAC_LOGIN_STRING="lanplus -H $IDRAC_HOST -U $IDRAC_USERNAME -P $IDRAC_PASSWORD"
|
||||||
|
fi
|
||||||
|
|
||||||
|
get_Dell_server_model
|
||||||
|
|
||||||
|
if [[ ! $SERVER_MANUFACTURER == "DELL" ]]
|
||||||
|
then
|
||||||
|
echo "/!\ Your server isn't a Dell product. Exiting." >&2
|
||||||
|
exit 1
|
||||||
|
fi
|
||||||
|
|
||||||
|
# Log main informations
|
||||||
|
echo "Server model: $SERVER_MANUFACTURER $SERVER_MODEL"
|
||||||
|
echo "iDRAC/IPMI host: $IDRAC_HOST"
|
||||||
|
|
||||||
|
# Log the check interval
|
||||||
|
echo "Check interval: ${CHECK_INTERVAL}s"
|
||||||
|
echo ""
|
||||||
|
|
||||||
|
# Define the interval for printing
|
||||||
|
readonly TABLE_HEADER_PRINT_INTERVAL=10
|
||||||
|
i=$TABLE_HEADER_PRINT_INTERVAL
|
||||||
|
# Set the flag used to check if the active fan control profile has changed
|
||||||
|
IS_DELL_FAN_CONTROL_PROFILE_APPLIED=true
|
||||||
|
|
||||||
|
# Check present sensors
|
||||||
|
IS_EXHAUST_TEMPERATURE_SENSOR_PRESENT=true
|
||||||
|
IS_CPU2_TEMPERATURE_SENSOR_PRESENT=true
|
||||||
|
retrieve_temperatures $IS_EXHAUST_TEMPERATURE_SENSOR_PRESENT $IS_CPU2_TEMPERATURE_SENSOR_PRESENT
|
||||||
|
if [ -z "$EXHAUST_TEMPERATURE" ]
|
||||||
|
then
|
||||||
|
echo "No exhaust temperature sensor detected."
|
||||||
|
IS_EXHAUST_TEMPERATURE_SENSOR_PRESENT=false
|
||||||
|
fi
|
||||||
|
if [ -z "$CPU2_TEMPERATURE" ]
|
||||||
|
then
|
||||||
|
echo "No CPU2 temperature sensor detected."
|
||||||
|
IS_CPU2_TEMPERATURE_SENSOR_PRESENT=false
|
||||||
|
fi
|
||||||
|
# Output new line to beautify output if one of the previous conditions have echoed
|
||||||
|
if ! $IS_EXHAUST_TEMPERATURE_SENSOR_PRESENT || ! $IS_CPU2_TEMPERATURE_SENSOR_PRESENT
|
||||||
|
then
|
||||||
|
echo ""
|
||||||
|
fi
|
||||||
|
|
||||||
|
|
||||||
|
# Start monitoring
|
||||||
|
while true; do
|
||||||
|
# Sleep for the specified interval before taking another reading
|
||||||
|
sleep $CHECK_INTERVAL &
|
||||||
|
SLEEP_PROCESS_PID=$!
|
||||||
|
|
||||||
|
retrieve_temperatures $IS_EXHAUST_TEMPERATURE_SENSOR_PRESENT $IS_CPU2_TEMPERATURE_SENSOR_PRESENT
|
||||||
|
|
||||||
|
# Define functions to check if CPU 1 and CPU 2 temperatures are above the threshold
|
||||||
|
function CPU1_OVERHEAT () { [ $CPU1_TEMPERATURE -gt $CPU_TEMPERATURE_THRESHOLD ]; }
|
||||||
|
if $IS_CPU2_TEMPERATURE_SENSOR_PRESENT
|
||||||
|
then
|
||||||
|
function CPU2_OVERHEAT () { [ $CPU2_TEMPERATURE -gt $CPU_TEMPERATURE_THRESHOLD ]; }
|
||||||
|
fi
|
||||||
|
|
||||||
|
# Initialize a variable to store the comments displayed when the fan control profile changed
|
||||||
|
COMMENT=" -"
|
||||||
|
# Check if CPU 1 is overheating then apply Dell default dynamic fan control profile if true
|
||||||
|
if CPU1_OVERHEAT
|
||||||
|
then
|
||||||
|
apply_Dell_fan_control_profile
|
||||||
|
|
||||||
|
if ! $IS_DELL_FAN_CONTROL_PROFILE_APPLIED
|
||||||
|
then
|
||||||
|
IS_DELL_FAN_CONTROL_PROFILE_APPLIED=true
|
||||||
|
|
||||||
|
# If CPU 2 temperature sensor is present, check if it is overheating too.
|
||||||
|
# Do not apply Dell default dynamic fan control profile as it has already been applied before
|
||||||
|
if $IS_CPU2_TEMPERATURE_SENSOR_PRESENT && CPU2_OVERHEAT
|
||||||
|
then
|
||||||
|
COMMENT="CPU 1 and CPU 2 temperatures are too high, Dell default dynamic fan control profile applied for safety"
|
||||||
|
else
|
||||||
|
COMMENT="CPU 1 temperature is too high, Dell default dynamic fan control profile applied for safety"
|
||||||
|
fi
|
||||||
|
fi
|
||||||
|
# If CPU 2 temperature sensor is present, check if it is overheating then apply Dell default dynamic fan control profile if true
|
||||||
|
elif $IS_CPU2_TEMPERATURE_SENSOR_PRESENT && CPU2_OVERHEAT
|
||||||
|
then
|
||||||
|
apply_Dell_fan_control_profile
|
||||||
|
|
||||||
|
if ! $IS_DELL_FAN_CONTROL_PROFILE_APPLIED
|
||||||
|
then
|
||||||
|
IS_DELL_FAN_CONTROL_PROFILE_APPLIED=true
|
||||||
|
COMMENT="CPU 2 temperature is too high, Dell default dynamic fan control profile applied for safety"
|
||||||
|
fi
|
||||||
|
else
|
||||||
|
# Adjust fan speed based on temperature thresholds
|
||||||
|
for i in ${!TEMP_THRESHOLDS[@]}; do
|
||||||
|
if [ $CPU1_TEMPERATURE -le ${TEMP_THRESHOLDS[$i]} ]; then
|
||||||
|
set_fan_speed ${FAN_SPEEDS[$i]}
|
||||||
|
break
|
||||||
|
fi
|
||||||
|
done
|
||||||
|
|
||||||
|
# Si la température est supérieure à tous les seuils, définir la vitesse maximale
|
||||||
|
if [ $CPU1_TEMPERATURE -gt ${TEMP_THRESHOLDS[-1]} ]; then
|
||||||
|
set_fan_speed ${FAN_SPEEDS[-1]}
|
||||||
|
fi
|
||||||
|
|
||||||
|
|
||||||
|
# Check if user fan control profile is applied then apply it if not
|
||||||
|
if $IS_DELL_FAN_CONTROL_PROFILE_APPLIED
|
||||||
|
then
|
||||||
|
IS_DELL_FAN_CONTROL_PROFILE_APPLIED=false
|
||||||
|
COMMENT="CPU temperature decreased and is now OK (<= $CPU_TEMPERATURE_THRESHOLD°C), user's fan control profile applied."
|
||||||
|
fi
|
||||||
|
fi
|
||||||
|
|
||||||
|
# Enable or disable, depending on the user's choice, third-party PCIe card Dell default cooling response
|
||||||
|
# No comment will be displayed on the change of this parameter since it is not related to the temperature of any device (CPU, GPU, etc...) but only to the settings made by the user when launching this Docker container
|
||||||
|
if $DISABLE_THIRD_PARTY_PCIE_CARD_DELL_DEFAULT_COOLING_RESPONSE
|
||||||
|
then
|
||||||
|
disable_third_party_PCIe_card_Dell_default_cooling_response
|
||||||
|
THIRD_PARTY_PCIE_CARD_DELL_DEFAULT_COOLING_RESPONSE_STATUS="Disabled"
|
||||||
|
else
|
||||||
|
enable_third_party_PCIe_card_Dell_default_cooling_response
|
||||||
|
THIRD_PARTY_PCIE_CARD_DELL_DEFAULT_COOLING_RESPONSE_STATUS="Enabled"
|
||||||
|
fi
|
||||||
|
|
||||||
|
# Print temperatures, active fan control profile and comment if any change happened during last time interval
|
||||||
|
if [ $i -eq $TABLE_HEADER_PRINT_INTERVAL ]
|
||||||
|
then
|
||||||
|
echo " ------- Temperatures -------"
|
||||||
|
echo " Date & time Inlet CPU 1 CPU 2 Exhaust Active fan speed profile Third-party PCIe card Dell default cooling response Comment"
|
||||||
|
i=0
|
||||||
|
fi
|
||||||
|
printf "%19s %3d°C %3d°C %3s°C %5s°C %40s %51s %s\n" "$(date +"%d-%m-%Y %T")" $INLET_TEMPERATURE $CPU1_TEMPERATURE "$CPU2_TEMPERATURE" "$EXHAUST_TEMPERATURE" "$CURRENT_FAN_CONTROL_PROFILE" "$THIRD_PARTY_PCIE_CARD_DELL_DEFAULT_COOLING_RESPONSE_STATUS" "$COMMENT"
|
||||||
|
((i++))
|
||||||
|
wait $SLEEP_PROCESS_PID
|
||||||
|
done
|
||||||
193
lxc/README-LXC.md
Normal file
193
lxc/README-LXC.md
Normal file
@@ -0,0 +1,193 @@
|
|||||||
|
# Installation LXC pour Proxmox
|
||||||
|
|
||||||
|
Ce guide vous explique comment installer le contrôleur de ventilateurs Dell iDRAC dans un container LXC Proxmox.
|
||||||
|
|
||||||
|
## Prérequis
|
||||||
|
|
||||||
|
### 1. Container LXC Proxmox
|
||||||
|
|
||||||
|
- Template Ubuntu 22.04 LTS
|
||||||
|
- Container **privilégié** (requis pour l'accès IPMI)
|
||||||
|
- Accès réseau configuré
|
||||||
|
|
||||||
|
### 2. Configuration Proxmox
|
||||||
|
|
||||||
|
Dans l'interface Proxmox ou en ligne de commande :
|
||||||
|
|
||||||
|
```bash
|
||||||
|
# Rendre le container privilégié
|
||||||
|
pct set <VMID> -privilege 1
|
||||||
|
|
||||||
|
# Activer nesting si nécessaire
|
||||||
|
pct set <VMID> -features nesting=1
|
||||||
|
|
||||||
|
# Configuration des ressources (exemple)
|
||||||
|
pct set <VMID> -memory 512 -cores 1
|
||||||
|
```
|
||||||
|
|
||||||
|
### 3. Accès IPMI
|
||||||
|
|
||||||
|
**Option A - iDRAC local (dans le container sur l'hôte physique) :**
|
||||||
|
```bash
|
||||||
|
# Ajouter l'accès au périphérique IPMI dans la configuration LXC
|
||||||
|
echo "lxc.cgroup2.devices.allow: c 10:* rwm" >> /etc/pve/lxc/<VMID>.conf
|
||||||
|
echo "lxc.mount.entry: /dev/ipmi0 dev/ipmi0 none bind,optional,create=file" >> /etc/pve/lxc/<VMID>.conf
|
||||||
|
```
|
||||||
|
|
||||||
|
**Option B - iDRAC distant :**
|
||||||
|
Aucune configuration matérielle supplémentaire requise.
|
||||||
|
|
||||||
|
## Installation
|
||||||
|
|
||||||
|
### 1. Téléchargement
|
||||||
|
|
||||||
|
```bash
|
||||||
|
# Dans le container LXC
|
||||||
|
cd /tmp
|
||||||
|
wget -O - https://github.com/votre-repo/archive/main.tar.gz | tar -xz
|
||||||
|
cd Dell_iDRAC_fan_controller-main/lxc
|
||||||
|
```
|
||||||
|
|
||||||
|
### 2. Installation automatique
|
||||||
|
|
||||||
|
```bash
|
||||||
|
chmod +x install-lxc.sh
|
||||||
|
./install-lxc.sh
|
||||||
|
```
|
||||||
|
|
||||||
|
Le script va :
|
||||||
|
- Installer ipmitool
|
||||||
|
- Créer la structure de répertoires
|
||||||
|
- Copier les fichiers
|
||||||
|
- Configurer le service systemd
|
||||||
|
- Créer le fichier de configuration
|
||||||
|
|
||||||
|
## Configuration
|
||||||
|
|
||||||
|
### 1. Édition de la configuration
|
||||||
|
|
||||||
|
```bash
|
||||||
|
nano /opt/idrac-fan-controller/config/environment
|
||||||
|
```
|
||||||
|
|
||||||
|
### 2. Paramètres principaux
|
||||||
|
|
||||||
|
```bash
|
||||||
|
# Connexion iDRAC
|
||||||
|
IDRAC_HOST=local # ou IP pour iDRAC distant
|
||||||
|
IDRAC_USERNAME=root # si iDRAC distant
|
||||||
|
IDRAC_PASSWORD=calvin # si iDRAC distant
|
||||||
|
|
||||||
|
# Seuils de température (°C)
|
||||||
|
CPU_TEMPERATURE_1=30
|
||||||
|
CPU_TEMPERATURE_2=40
|
||||||
|
CPU_TEMPERATURE_3=50
|
||||||
|
CPU_TEMPERATURE_4=60
|
||||||
|
|
||||||
|
# Vitesses correspondantes (%)
|
||||||
|
FAN_SPEED_1=10
|
||||||
|
FAN_SPEED_2=30
|
||||||
|
FAN_SPEED_3=60
|
||||||
|
FAN_SPEED_4=80
|
||||||
|
|
||||||
|
# Seuil de sécurité
|
||||||
|
CPU_TEMPERATURE_THRESHOLD=70
|
||||||
|
```
|
||||||
|
|
||||||
|
## Utilisation
|
||||||
|
|
||||||
|
### Gestion du service
|
||||||
|
|
||||||
|
```bash
|
||||||
|
# Démarrer
|
||||||
|
systemctl start idrac-fan-controller
|
||||||
|
|
||||||
|
# Arrêter
|
||||||
|
systemctl stop idrac-fan-controller
|
||||||
|
|
||||||
|
# Redémarrer
|
||||||
|
systemctl restart idrac-fan-controller
|
||||||
|
|
||||||
|
# Statut
|
||||||
|
systemctl status idrac-fan-controller
|
||||||
|
|
||||||
|
# Activer au démarrage (déjà fait par l'installation)
|
||||||
|
systemctl enable idrac-fan-controller
|
||||||
|
```
|
||||||
|
|
||||||
|
### Surveillance
|
||||||
|
|
||||||
|
```bash
|
||||||
|
# Logs en temps réel
|
||||||
|
journalctl -u idrac-fan-controller -f
|
||||||
|
|
||||||
|
# Logs récents
|
||||||
|
journalctl -u idrac-fan-controller -n 50
|
||||||
|
|
||||||
|
# Test de santé
|
||||||
|
/opt/idrac-fan-controller/healthcheck.sh
|
||||||
|
```
|
||||||
|
|
||||||
|
## Dépannage
|
||||||
|
|
||||||
|
### Vérification IPMI
|
||||||
|
|
||||||
|
```bash
|
||||||
|
# Test de base
|
||||||
|
ipmitool fru
|
||||||
|
|
||||||
|
# Si erreur "Could not open device"
|
||||||
|
ls -la /dev/ipmi*
|
||||||
|
# Doit montrer /dev/ipmi0 ou similaire
|
||||||
|
|
||||||
|
# Vérifier les permissions
|
||||||
|
id
|
||||||
|
# Doit être root dans le container
|
||||||
|
```
|
||||||
|
|
||||||
|
### Erreurs communes
|
||||||
|
|
||||||
|
**"Could not open device at /dev/ipmi0"**
|
||||||
|
- Vérifier que le container est privilégié
|
||||||
|
- S'assurer que l'accès IPMI est configuré dans Proxmox
|
||||||
|
- Redémarrer le container après les changements
|
||||||
|
|
||||||
|
**Service qui ne démarre pas**
|
||||||
|
```bash
|
||||||
|
# Vérifier la syntaxe du fichier de configuration
|
||||||
|
systemctl status idrac-fan-controller
|
||||||
|
|
||||||
|
# Tester manuellement
|
||||||
|
cd /opt/idrac-fan-controller
|
||||||
|
sudo -u root bash Dell_iDRAC_fan_controller.sh
|
||||||
|
```
|
||||||
|
|
||||||
|
## Désinstallation
|
||||||
|
|
||||||
|
```bash
|
||||||
|
cd /tmp/Dell_iDRAC_fan_controller-main/lxc
|
||||||
|
chmod +x uninstall-lxc.sh
|
||||||
|
./uninstall-lxc.sh
|
||||||
|
```
|
||||||
|
|
||||||
|
## Comparaison Docker vs LXC
|
||||||
|
|
||||||
|
| Aspect | Docker | LXC |
|
||||||
|
|--------|---------|-----|
|
||||||
|
| **Installation** | Pull image | Script d'installation |
|
||||||
|
| **Configuration** | Variables ENV | Fichier de config |
|
||||||
|
| **Gestion** | docker-compose | systemctl |
|
||||||
|
| **Logs** | docker logs | journalctl |
|
||||||
|
| **Ressources** | Container isolé | Container système |
|
||||||
|
| **Accès hardware** | Device mapping | Accès direct |
|
||||||
|
| **Maintenance** | Image updates | Package updates |
|
||||||
|
| **Backup** | Image + volumes | Snapshot LXC |
|
||||||
|
|
||||||
|
## Avantages LXC
|
||||||
|
|
||||||
|
- **Performance** : Pas d'overhead Docker
|
||||||
|
- **Intégration** : Gestion native avec Proxmox
|
||||||
|
- **Accès hardware** : Plus direct et simple
|
||||||
|
- **Ressources** : Utilisation optimale
|
||||||
|
- **Logs** : Intégrés avec systemd
|
||||||
|
- **Maintenance** : Mise à jour avec le système
|
||||||
105
lxc/functions.sh
Executable file
105
lxc/functions.sh
Executable file
@@ -0,0 +1,105 @@
|
|||||||
|
# This function applies Dell's default dynamic fan control profile
|
||||||
|
function apply_Dell_fan_control_profile () {
|
||||||
|
# Use ipmitool to send the raw command to set fan control to Dell default
|
||||||
|
ipmitool -I $IDRAC_LOGIN_STRING raw 0x30 0x30 0x01 0x01 > /dev/null
|
||||||
|
CURRENT_FAN_CONTROL_PROFILE="Dell default dynamic fan control profile"
|
||||||
|
}
|
||||||
|
|
||||||
|
# This function applies a user-specified static fan control profile
|
||||||
|
function apply_user_fan_control_profile () {
|
||||||
|
# Use ipmitool to send the raw command to set fan control to user-specified value
|
||||||
|
ipmitool -I $IDRAC_LOGIN_STRING raw 0x30 0x30 0x01 0x00 > /dev/null
|
||||||
|
ipmitool -I $IDRAC_LOGIN_STRING raw 0x30 0x30 0x02 0xff $HEXADECIMAL_FAN_SPEED > /dev/null
|
||||||
|
CURRENT_FAN_CONTROL_PROFILE="User static fan control profile ($DECIMAL_FAN_SPEED%)"
|
||||||
|
}
|
||||||
|
|
||||||
|
# This function sets the fan speed to a specified value
|
||||||
|
# Usage: set_fan_speed <decimal_speed>
|
||||||
|
function set_fan_speed () {
|
||||||
|
local SPEED=$1
|
||||||
|
local HEX_SPEED=$(convert_decimal_value_to_hexadecimal $SPEED)
|
||||||
|
ipmitool -I $IDRAC_LOGIN_STRING raw 0x30 0x30 0x01 0x00 > /dev/null
|
||||||
|
ipmitool -I $IDRAC_LOGIN_STRING raw 0x30 0x30 0x02 0xff $HEX_SPEED > /dev/null
|
||||||
|
CURRENT_FAN_CONTROL_PROFILE="User static fan control profile ($SPEED%)"
|
||||||
|
}
|
||||||
|
|
||||||
|
# Convert first parameter given ($DECIMAL_NUMBER) to hexadecimal
|
||||||
|
# Usage : convert_decimal_value_to_hexadecimal $DECIMAL_NUMBER
|
||||||
|
# Returns : hexadecimal value of DECIMAL_NUMBER
|
||||||
|
function convert_decimal_value_to_hexadecimal () {
|
||||||
|
local DECIMAL_NUMBER=$1
|
||||||
|
local HEXADECIMAL_NUMBER=$(printf '0x%02x' $DECIMAL_NUMBER)
|
||||||
|
echo $HEXADECIMAL_NUMBER
|
||||||
|
}
|
||||||
|
|
||||||
|
# Retrieve temperature sensors data using ipmitool
|
||||||
|
# Usage : retrieve_temperatures $IS_EXHAUST_TEMPERATURE_SENSOR_PRESENT $IS_CPU2_TEMPERATURE_SENSOR_PRESENT
|
||||||
|
function retrieve_temperatures () {
|
||||||
|
if (( $# != 2 ))
|
||||||
|
then
|
||||||
|
printf "Illegal number of parameters.\nUsage: retrieve_temperatures \$IS_EXHAUST_TEMPERATURE_SENSOR_PRESENT \$IS_CPU2_TEMPERATURE_SENSOR_PRESENT" >&2
|
||||||
|
return 1
|
||||||
|
fi
|
||||||
|
local IS_EXHAUST_TEMPERATURE_SENSOR_PRESENT=$1
|
||||||
|
local IS_CPU2_TEMPERATURE_SENSOR_PRESENT=$2
|
||||||
|
|
||||||
|
local DATA=$(ipmitool -I $IDRAC_LOGIN_STRING sdr type temperature | grep degrees)
|
||||||
|
|
||||||
|
# Parse CPU data
|
||||||
|
local CPU_DATA=$(echo "$DATA" | grep "3\." | grep -Po '\d{2}')
|
||||||
|
CPU1_TEMPERATURE=$(echo $CPU_DATA | awk '{print $1;}')
|
||||||
|
if $IS_CPU2_TEMPERATURE_SENSOR_PRESENT
|
||||||
|
then
|
||||||
|
CPU2_TEMPERATURE=$(echo $CPU_DATA | awk '{print $2;}')
|
||||||
|
else
|
||||||
|
CPU2_TEMPERATURE="-"
|
||||||
|
fi
|
||||||
|
|
||||||
|
# Parse inlet temperature data
|
||||||
|
INLET_TEMPERATURE=$(echo "$DATA" | grep Inlet | grep -Po '\d{2}' | tail -1)
|
||||||
|
|
||||||
|
# If exhaust temperature sensor is present, parse its temperature data
|
||||||
|
if $IS_EXHAUST_TEMPERATURE_SENSOR_PRESENT
|
||||||
|
then
|
||||||
|
EXHAUST_TEMPERATURE=$(echo "$DATA" | grep Exhaust | grep -Po '\d{2}' | tail -1)
|
||||||
|
else
|
||||||
|
EXHAUST_TEMPERATURE="-"
|
||||||
|
fi
|
||||||
|
}
|
||||||
|
|
||||||
|
function enable_third_party_PCIe_card_Dell_default_cooling_response () {
|
||||||
|
# We could check the current cooling response before applying but it's not very useful so let's skip the test and apply directly
|
||||||
|
ipmitool -I $IDRAC_LOGIN_STRING raw 0x30 0xce 0x00 0x16 0x05 0x00 0x00 0x00 0x05 0x00 0x00 0x00 0x00 > /dev/null
|
||||||
|
}
|
||||||
|
|
||||||
|
function disable_third_party_PCIe_card_Dell_default_cooling_response () {
|
||||||
|
# We could check the current cooling response before applying but it's not very useful so let's skip the test and apply directly
|
||||||
|
ipmitool -I $IDRAC_LOGIN_STRING raw 0x30 0xce 0x00 0x16 0x05 0x00 0x00 0x00 0x05 0x00 0x01 0x00 0x00 > /dev/null
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
|
# Prepare traps in case of container exit
|
||||||
|
function gracefull_exit () {
|
||||||
|
apply_Dell_fan_control_profile
|
||||||
|
enable_third_party_PCIe_card_Dell_default_cooling_response
|
||||||
|
echo "/!\ WARNING /!\ Container stopped, Dell default dynamic fan control profile applied for safety."
|
||||||
|
exit 0
|
||||||
|
}
|
||||||
|
|
||||||
|
# Helps debugging when people are posting their output
|
||||||
|
function get_Dell_server_model () {
|
||||||
|
IPMI_FRU_content=$(ipmitool -I $IDRAC_LOGIN_STRING fru 2>/dev/null) # FRU stands for "Field Replaceable Unit"
|
||||||
|
|
||||||
|
SERVER_MANUFACTURER=$(echo "$IPMI_FRU_content" | grep "Product Manufacturer" | awk -F ': ' '{print $2}')
|
||||||
|
SERVER_MODEL=$(echo "$IPMI_FRU_content" | grep "Product Name" | awk -F ': ' '{print $2}')
|
||||||
|
|
||||||
|
# Check if SERVER_MANUFACTURER is empty, if yes, assign value based on "Board Mfg"
|
||||||
|
if [ -z "$SERVER_MANUFACTURER" ]; then
|
||||||
|
SERVER_MANUFACTURER=$(echo "$IPMI_FRU_content" | tr -s ' ' | grep "Board Mfg :" | awk -F ': ' '{print $2}')
|
||||||
|
fi
|
||||||
|
|
||||||
|
# Check if SERVER_MODEL is empty, if yes, assign value based on "Board Product"
|
||||||
|
if [ -z "$SERVER_MODEL" ]; then
|
||||||
|
SERVER_MODEL=$(echo "$IPMI_FRU_content" | tr -s ' ' | grep "Board Product :" | awk -F ': ' '{print $2}')
|
||||||
|
fi
|
||||||
|
}
|
||||||
24
lxc/healthcheck.sh
Executable file
24
lxc/healthcheck.sh
Executable file
@@ -0,0 +1,24 @@
|
|||||||
|
#!/bin/bash
|
||||||
|
|
||||||
|
# Enable strict bash mode to stop the script if an uninitialized variable is used, if a command fails, or if a command with a pipe fails
|
||||||
|
# Not working in some setups : https://github.com/tigerblue77/Dell_iDRAC_fan_controller/issues/48
|
||||||
|
# set -euo pipefail
|
||||||
|
|
||||||
|
source functions.sh
|
||||||
|
|
||||||
|
# Check if the iDRAC host is set to 'local' or not then set the IDRAC_LOGIN_STRING accordingly
|
||||||
|
if [[ $IDRAC_HOST == "local" ]]
|
||||||
|
then
|
||||||
|
# Check that the Docker host IPMI device (the iDRAC) has been exposed to the Docker container
|
||||||
|
if [ ! -e "/dev/ipmi0" ] && [ ! -e "/dev/ipmi/0" ] && [ ! -e "/dev/ipmidev/0" ]; then
|
||||||
|
echo "/!\ Could not open device at /dev/ipmi0 or /dev/ipmi/0 or /dev/ipmidev/0, check that you added the device to your Docker container or stop using local mode. Exiting." >&2
|
||||||
|
exit 1
|
||||||
|
fi
|
||||||
|
IDRAC_LOGIN_STRING='open'
|
||||||
|
else
|
||||||
|
echo "iDRAC/IPMI username: $IDRAC_USERNAME"
|
||||||
|
echo "iDRAC/IPMI password: $IDRAC_PASSWORD"
|
||||||
|
IDRAC_LOGIN_STRING="lanplus -H $IDRAC_HOST -U $IDRAC_USERNAME -P $IDRAC_PASSWORD"
|
||||||
|
fi
|
||||||
|
|
||||||
|
ipmitool -I $IDRAC_LOGIN_STRING sdr type temperature
|
||||||
39
lxc/idrac-fan-controller.service
Normal file
39
lxc/idrac-fan-controller.service
Normal file
@@ -0,0 +1,39 @@
|
|||||||
|
[Unit]
|
||||||
|
Description=Dell iDRAC Fan Controller
|
||||||
|
Documentation=https://github.com/tigerblue77/Dell_iDRAC_fan_controller_Docker
|
||||||
|
After=network.target
|
||||||
|
Wants=network.target
|
||||||
|
|
||||||
|
[Service]
|
||||||
|
Type=simple
|
||||||
|
User=root
|
||||||
|
Group=root
|
||||||
|
WorkingDirectory=/opt/idrac-fan-controller
|
||||||
|
EnvironmentFile=/opt/idrac-fan-controller/config/environment
|
||||||
|
ExecStart=/opt/idrac-fan-controller/Dell_iDRAC_fan_controller.sh
|
||||||
|
ExecReload=/bin/kill -HUP $MAINPID
|
||||||
|
Restart=always
|
||||||
|
RestartSec=10
|
||||||
|
KillMode=mixed
|
||||||
|
TimeoutStopSec=30
|
||||||
|
|
||||||
|
# Logging
|
||||||
|
StandardOutput=journal
|
||||||
|
StandardError=journal
|
||||||
|
SyslogIdentifier=idrac-fan-controller
|
||||||
|
|
||||||
|
# Security settings
|
||||||
|
NoNewPrivileges=false
|
||||||
|
PrivateTmp=true
|
||||||
|
ProtectHome=true
|
||||||
|
ProtectSystem=strict
|
||||||
|
ReadWritePaths=/var/log/idrac-fan-controller
|
||||||
|
ReadOnlyPaths=/opt/idrac-fan-controller
|
||||||
|
|
||||||
|
# Hardware access required for IPMI
|
||||||
|
DeviceAllow=/dev/ipmi0 rw
|
||||||
|
DeviceAllow=/dev/ipmi/0 rw
|
||||||
|
DeviceAllow=/dev/ipmidev/0 rw
|
||||||
|
|
||||||
|
[Install]
|
||||||
|
WantedBy=multi-user.target
|
||||||
125
lxc/install-lxc.sh
Executable file
125
lxc/install-lxc.sh
Executable file
@@ -0,0 +1,125 @@
|
|||||||
|
#!/bin/bash
|
||||||
|
|
||||||
|
# Script d'installation du contrôleur de ventilateurs Dell iDRAC pour LXC/Proxmox
|
||||||
|
# Usage: ./install-lxc.sh
|
||||||
|
|
||||||
|
set -euo pipefail
|
||||||
|
|
||||||
|
# Couleurs pour l'affichage
|
||||||
|
RED='\033[0;31m'
|
||||||
|
GREEN='\033[0;32m'
|
||||||
|
YELLOW='\033[1;33m'
|
||||||
|
BLUE='\033[0;34m'
|
||||||
|
NC='\033[0m' # No Color
|
||||||
|
|
||||||
|
# Configuration
|
||||||
|
INSTALL_DIR="/opt/idrac-fan-controller"
|
||||||
|
SERVICE_NAME="idrac-fan-controller"
|
||||||
|
CONFIG_FILE="$INSTALL_DIR/config/environment"
|
||||||
|
SCRIPT_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
|
||||||
|
|
||||||
|
echo -e "${BLUE}=== Installation du contrôleur de ventilateurs Dell iDRAC ===${NC}"
|
||||||
|
echo
|
||||||
|
|
||||||
|
# Vérifier les privilèges root
|
||||||
|
if [[ $EUID -ne 0 ]]; then
|
||||||
|
echo -e "${RED}Erreur: Ce script doit être exécuté en tant que root${NC}"
|
||||||
|
exit 1
|
||||||
|
fi
|
||||||
|
|
||||||
|
# Vérifier si on est dans un container LXC
|
||||||
|
if ! systemd-detect-virt --container >/dev/null 2>&1; then
|
||||||
|
echo -e "${YELLOW}Attention: Ce script est conçu pour un container LXC Proxmox${NC}"
|
||||||
|
read -p "Continuer quand même ? (y/N): " -n 1 -r
|
||||||
|
echo
|
||||||
|
if [[ ! $REPLY =~ ^[Yy]$ ]]; then
|
||||||
|
exit 0
|
||||||
|
fi
|
||||||
|
fi
|
||||||
|
|
||||||
|
echo -e "${BLUE}1. Mise à jour du système...${NC}"
|
||||||
|
apt-get update -qq
|
||||||
|
|
||||||
|
echo -e "${BLUE}2. Installation des dépendances...${NC}"
|
||||||
|
apt-get install -y ipmitool
|
||||||
|
|
||||||
|
echo -e "${BLUE}3. Vérification de l'accès IPMI...${NC}"
|
||||||
|
if [ ! -e "/dev/ipmi0" ] && [ ! -e "/dev/ipmi/0" ] && [ ! -e "/dev/ipmidev/0" ]; then
|
||||||
|
echo -e "${YELLOW}Attention: Aucun périphérique IPMI détecté${NC}"
|
||||||
|
echo -e "${YELLOW}Assurez-vous que le container LXC est configuré avec l'accès au hardware IPMI${NC}"
|
||||||
|
echo -e "${YELLOW}Configuration Proxmox requise:${NC}"
|
||||||
|
echo -e "${YELLOW} - Container privilégié (privilege: 1)${NC}"
|
||||||
|
echo -e "${YELLOW} - Accès au périphérique IPMI configuré${NC}"
|
||||||
|
echo
|
||||||
|
fi
|
||||||
|
|
||||||
|
echo -e "${BLUE}4. Création de la structure de répertoires...${NC}"
|
||||||
|
mkdir -p "$INSTALL_DIR/config"
|
||||||
|
mkdir -p "/var/log/$SERVICE_NAME"
|
||||||
|
|
||||||
|
echo -e "${BLUE}5. Copie des fichiers de l'application...${NC}"
|
||||||
|
cp "$SCRIPT_DIR/../Dell_iDRAC_fan_controller.sh" "$INSTALL_DIR/"
|
||||||
|
cp "$SCRIPT_DIR/../functions.sh" "$INSTALL_DIR/"
|
||||||
|
cp "$SCRIPT_DIR/../healthcheck.sh" "$INSTALL_DIR/"
|
||||||
|
cp "$SCRIPT_DIR/idrac-fan-controller.service" "/etc/systemd/system/"
|
||||||
|
|
||||||
|
# Rendre les scripts exécutables
|
||||||
|
chmod +x "$INSTALL_DIR"/*.sh
|
||||||
|
|
||||||
|
echo -e "${BLUE}6. Configuration des variables d'environnement...${NC}"
|
||||||
|
if [ ! -f "$CONFIG_FILE" ]; then
|
||||||
|
cat > "$CONFIG_FILE" << 'EOF'
|
||||||
|
# Configuration du contrôleur de ventilateurs Dell iDRAC
|
||||||
|
# Modifiez ces valeurs selon votre environnement
|
||||||
|
|
||||||
|
# Connexion iDRAC
|
||||||
|
IDRAC_HOST=local
|
||||||
|
IDRAC_USERNAME=root
|
||||||
|
IDRAC_PASSWORD=calvin
|
||||||
|
|
||||||
|
# Contrôle dynamique des ventilateurs
|
||||||
|
CPU_TEMPERATURE_1=30
|
||||||
|
CPU_TEMPERATURE_2=40
|
||||||
|
CPU_TEMPERATURE_3=50
|
||||||
|
CPU_TEMPERATURE_4=60
|
||||||
|
FAN_SPEED_1=10
|
||||||
|
FAN_SPEED_2=30
|
||||||
|
FAN_SPEED_3=60
|
||||||
|
FAN_SPEED_4=80
|
||||||
|
|
||||||
|
# Seuil de sécurité
|
||||||
|
CPU_TEMPERATURE_THRESHOLD=70
|
||||||
|
|
||||||
|
# Autres paramètres
|
||||||
|
CHECK_INTERVAL=60
|
||||||
|
DISABLE_THIRD_PARTY_PCIE_CARD_DELL_DEFAULT_COOLING_RESPONSE=false
|
||||||
|
EOF
|
||||||
|
echo -e "${GREEN}Fichier de configuration créé: $CONFIG_FILE${NC}"
|
||||||
|
else
|
||||||
|
echo -e "${YELLOW}Fichier de configuration existant conservé: $CONFIG_FILE${NC}"
|
||||||
|
fi
|
||||||
|
|
||||||
|
echo -e "${BLUE}7. Configuration du service systemd...${NC}"
|
||||||
|
systemctl daemon-reload
|
||||||
|
systemctl enable "$SERVICE_NAME"
|
||||||
|
|
||||||
|
echo -e "${GREEN}=== Installation terminée avec succès ! ===${NC}"
|
||||||
|
echo
|
||||||
|
echo -e "${BLUE}Prochaines étapes:${NC}"
|
||||||
|
echo "1. Éditez la configuration: nano $CONFIG_FILE"
|
||||||
|
echo "2. Démarrez le service: systemctl start $SERVICE_NAME"
|
||||||
|
echo "3. Vérifiez le statut: systemctl status $SERVICE_NAME"
|
||||||
|
echo "4. Consultez les logs: journalctl -u $SERVICE_NAME -f"
|
||||||
|
echo
|
||||||
|
echo -e "${BLUE}Commandes utiles:${NC}"
|
||||||
|
echo "• Démarrer: systemctl start $SERVICE_NAME"
|
||||||
|
echo "• Arrêter: systemctl stop $SERVICE_NAME"
|
||||||
|
echo "• Redémarrer: systemctl restart $SERVICE_NAME"
|
||||||
|
echo "• Statut: systemctl status $SERVICE_NAME"
|
||||||
|
echo "• Logs: journalctl -u $SERVICE_NAME -f"
|
||||||
|
echo "• Test: $INSTALL_DIR/healthcheck.sh"
|
||||||
|
echo
|
||||||
|
echo -e "${YELLOW}N'oubliez pas de configurer votre container LXC Proxmox avec:${NC}"
|
||||||
|
echo "• pct set <VMID> -privilege 1"
|
||||||
|
echo "• pct set <VMID> -features nesting=1"
|
||||||
|
echo "• Configuration de l'accès IPMI selon votre setup"
|
||||||
105
lxc/uninstall-lxc.sh
Executable file
105
lxc/uninstall-lxc.sh
Executable file
@@ -0,0 +1,105 @@
|
|||||||
|
#!/bin/bash
|
||||||
|
|
||||||
|
# Script de désinstallation du contrôleur de ventilateurs Dell iDRAC pour LXC
|
||||||
|
# Usage: ./uninstall-lxc.sh
|
||||||
|
|
||||||
|
set -euo pipefail
|
||||||
|
|
||||||
|
# Couleurs pour l'affichage
|
||||||
|
RED='\033[0;31m'
|
||||||
|
GREEN='\033[0;32m'
|
||||||
|
YELLOW='\033[1;33m'
|
||||||
|
BLUE='\033[0;34m'
|
||||||
|
NC='\033[0m' # No Color
|
||||||
|
|
||||||
|
# Configuration
|
||||||
|
INSTALL_DIR="/opt/idrac-fan-controller"
|
||||||
|
SERVICE_NAME="idrac-fan-controller"
|
||||||
|
CONFIG_FILE="$INSTALL_DIR/config/environment"
|
||||||
|
|
||||||
|
echo -e "${RED}=== Désinstallation du contrôleur de ventilateurs Dell iDRAC ===${NC}"
|
||||||
|
echo
|
||||||
|
|
||||||
|
# Vérifier les privilèges root
|
||||||
|
if [[ $EUID -ne 0 ]]; then
|
||||||
|
echo -e "${RED}Erreur: Ce script doit être exécuté en tant que root${NC}"
|
||||||
|
exit 1
|
||||||
|
fi
|
||||||
|
|
||||||
|
# Confirmation
|
||||||
|
echo -e "${YELLOW}Cette opération va :${NC}"
|
||||||
|
echo "• Arrêter et désactiver le service $SERVICE_NAME"
|
||||||
|
echo "• Supprimer tous les fichiers dans $INSTALL_DIR"
|
||||||
|
echo "• Supprimer le service systemd"
|
||||||
|
echo "• Supprimer les logs"
|
||||||
|
echo
|
||||||
|
echo -e "${RED}ATTENTION: Cette action est irréversible !${NC}"
|
||||||
|
read -p "Êtes-vous sûr de vouloir continuer ? (yes/NO): " -r
|
||||||
|
if [[ ! $REPLY =~ ^yes$ ]]; then
|
||||||
|
echo -e "${GREEN}Désinstallation annulée.${NC}"
|
||||||
|
exit 0
|
||||||
|
fi
|
||||||
|
echo
|
||||||
|
|
||||||
|
echo -e "${BLUE}1. Arrêt du service...${NC}"
|
||||||
|
if systemctl is-active --quiet "$SERVICE_NAME"; then
|
||||||
|
systemctl stop "$SERVICE_NAME"
|
||||||
|
echo -e "${GREEN}Service arrêté${NC}"
|
||||||
|
else
|
||||||
|
echo -e "${YELLOW}Service déjà arrêté${NC}"
|
||||||
|
fi
|
||||||
|
|
||||||
|
echo -e "${BLUE}2. Désactivation du service...${NC}"
|
||||||
|
if systemctl is-enabled --quiet "$SERVICE_NAME" 2>/dev/null; then
|
||||||
|
systemctl disable "$SERVICE_NAME"
|
||||||
|
echo -e "${GREEN}Service désactivé${NC}"
|
||||||
|
else
|
||||||
|
echo -e "${YELLOW}Service déjà désactivé${NC}"
|
||||||
|
fi
|
||||||
|
|
||||||
|
echo -e "${BLUE}3. Suppression du fichier de service systemd...${NC}"
|
||||||
|
if [ -f "/etc/systemd/system/$SERVICE_NAME.service" ]; then
|
||||||
|
rm -f "/etc/systemd/system/$SERVICE_NAME.service"
|
||||||
|
systemctl daemon-reload
|
||||||
|
echo -e "${GREEN}Fichier de service supprimé${NC}"
|
||||||
|
else
|
||||||
|
echo -e "${YELLOW}Fichier de service non trouvé${NC}"
|
||||||
|
fi
|
||||||
|
|
||||||
|
echo -e "${BLUE}4. Sauvegarde de la configuration...${NC}"
|
||||||
|
if [ -f "$CONFIG_FILE" ]; then
|
||||||
|
BACKUP_FILE="/tmp/idrac-fan-controller-config-backup-$(date +%Y%m%d-%H%M%S)"
|
||||||
|
cp "$CONFIG_FILE" "$BACKUP_FILE"
|
||||||
|
echo -e "${GREEN}Configuration sauvegardée dans: $BACKUP_FILE${NC}"
|
||||||
|
fi
|
||||||
|
|
||||||
|
echo -e "${BLUE}5. Suppression des fichiers d'installation...${NC}"
|
||||||
|
if [ -d "$INSTALL_DIR" ]; then
|
||||||
|
rm -rf "$INSTALL_DIR"
|
||||||
|
echo -e "${GREEN}Répertoire d'installation supprimé${NC}"
|
||||||
|
else
|
||||||
|
echo -e "${YELLOW}Répertoire d'installation non trouvé${NC}"
|
||||||
|
fi
|
||||||
|
|
||||||
|
echo -e "${BLUE}6. Suppression des logs...${NC}"
|
||||||
|
if [ -d "/var/log/$SERVICE_NAME" ]; then
|
||||||
|
rm -rf "/var/log/$SERVICE_NAME"
|
||||||
|
echo -e "${GREEN}Logs supprimés${NC}"
|
||||||
|
else
|
||||||
|
echo -e "${YELLOW}Répertoire de logs non trouvé${NC}"
|
||||||
|
fi
|
||||||
|
|
||||||
|
echo -e "${BLUE}7. Nettoyage des logs systemd...${NC}"
|
||||||
|
journalctl --vacuum-time=1d --quiet || true
|
||||||
|
|
||||||
|
echo -e "${GREEN}=== Désinstallation terminée avec succès ! ===${NC}"
|
||||||
|
echo
|
||||||
|
echo -e "${BLUE}Actions effectuées:${NC}"
|
||||||
|
echo "• Service $SERVICE_NAME arrêté et désactivé"
|
||||||
|
echo "• Fichiers d'application supprimés"
|
||||||
|
echo "• Logs nettoyés"
|
||||||
|
if [ -f "$BACKUP_FILE" ]; then
|
||||||
|
echo -e "${YELLOW}• Configuration sauvegardée: $BACKUP_FILE${NC}"
|
||||||
|
fi
|
||||||
|
echo
|
||||||
|
echo -e "${YELLOW}Note: Les ventilateurs sont maintenant contrôlés par le système Dell par défaut${NC}"
|
||||||
Reference in New Issue
Block a user